manualshive.com logo in svg

Furuno DS-60, Operator'S Manual

The Furuno DS-60 is a cutting-edge marine radar capable of delivering highly accurate and detailed information about surrounding vessels and objects. With its advanced features and exceptional performance, it ensures the safety and efficiency of various marine activities. Download its free Brochure & Specs manual from manualshive.com to unlock the full potential of this remarkable product.

Share
Download
background image

3.  BERTHING DISPLAY

3-5

3.3.3

How to select the past track format

The past track can be shown with dots or dots and past track markers. See the illus-
tration on page 3-3.

1. Press the 

MENU/ESC

 key to open the menu.

2. Select [Past Tracks] then press the 

ENT

 key.

3. Select [ON] or [OFF] then press the 

ENT

 key. 

[ON]: Past track dots
[OFF]: Past track marker only

4. Press the 

DISP

 key to close the menu.

3.3.4

How to select the predicted track plot interval

Select the interval at which to plot the predicted track as follows:

1. Press the 

MENU/ESC

 key to open the menu.

2. Select [Plot Time] then press the 

ENT

 key.

3. Select a time then press the 

ENT

 key. A new marker is plotted at equally time-

spaced intervals of 1/5 of the plot time selected. For example, if you select the 10-
minute interval, the predicted position is plotted at two-minute intervals.

4. Press the 

DISP

 key to close the menu.

Summary of Contents for DS-60































































































Reviews:

No comments

Related manuals for DS-60

Brands by name

Popular brands

Load more brands