manualshive.com logo in svg

Furuno DS-60, Operator'S Manual

The Furuno DS-60 is a cutting-edge marine radar capable of delivering highly accurate and detailed information about surrounding vessels and objects. With its advanced features and exceptional performance, it ensures the safety and efficiency of various marine activities. Download its free Brochure & Specs manual from manualshive.com to unlock the full potential of this remarkable product.

Share
Download
background image

i

IMPORTANT NOTICES

General

•  This manual has been authored with simplified grammar, to meet the needs of international

users.

•  The operator of this equipment must read and follow the descriptions in this manual. Wrong

operation or maintenance can cancel the warranty or cause injury.

•  Do not copy any part of this manual without written permission from FURUNO.
•  If this manual is lost or worn, contact your dealer about replacement.
•  The contents of this manual and equipment specifications can change without notice.
•  The example screens (or illustrations) shown in this manual can be different from the screens 

you see on your display. The screens you see depend on your system configuration and equip-
ment settings.

•  Save this manual for future reference.
•  Any modification of the equipment (including software) by persons not authorized by FURUNO 

will cancel the warranty.

•  All brand and product names are trademarks, registered trademarks or service marks of their 

respective holders.

How to discard this product

Discard this product according to local regulations for the disposal of industrial waste. For disposal 
in the USA, see the homepage of the Electronics Industries Alliance (http://www.eiae.org/) for the 
correct method of disposal.

How to discard a used battery

Some FURUNO products have a battery(ies). To see if your product has a battery(ies), see the 
chapter on Maintenance. Follow the instructions below if a battery(ies) is used.

In the European Union

The crossed-out trash can symbol indicates that all types of batteries 
must not be discarded in standard trash, or at a trash site. Take the 
used batteries to a battery collection site according to your national 
legislation and the Batteries Directive 2006/66/EU.

In the USA

The Mobius loop symbol (three chasing arrows) indicates that Ni-Cd 
and lead-acid rechargeable batteries must be recycled. Take the used 
batteries to a battery collection site according to local laws.

In the other countries

There are no international standards for the battery recycle symbol. The number of symbols can 
increase when the other countries make their own recycle symbols in the future.

Cd

Ni-Cd

Pb

Summary of Contents for DS-60































































































Reviews:

No comments

Related manuals for DS-60

Brands by name

Popular brands

Load more brands