Fujitsu SV600, Basic Operation Manual

Page: 450 / 500

Press the [Scan/Stop] button to rotate the roller. Gently wipe the dirt and dust off while
taking care not to damage the surface of the roller. Make sure that they are cleaned
properly because residue on the roller will affect the feeding performance.
l Eject roller (× 1, located on the scanner side)
Press the [Scan/Stop] button to rotate the roller. Gently wipe the dirt and dust off while
taking care not to damage the surface of the roller. Make sure that they are cleaned
properly because residue on the roller will affect the feeding performance.
If the eject roller is difficult to clean, try cleaning it from the back of the ScanSnap while
you keep the top cover slightly open.
Eject Roller (x 1)
HINT
Pressing the [Scan/Stop] button seven times will rotate the feed roller and the eject roller one
revolution.
3.
Close the top cover and the output guide.
Top Cover Feed Guide
Output Guide
a It clicks when it returns to its original position.
ATTENTION
Make sure that the top cover is completely closed.
Otherwise, paper jams or other feeding errors, or image faults may occur.
Cleaning S1100i
450