Fujitsu SPARC Enterprise T2000, Service Manual, Page: 14 / 174

xii SPARC Enterprise T2000 Server Service Manual • April 2007
FIGURE 4-5
Replacing the Blower Unit 4–8
FIGURE 4-6
Locating the Hard Drive Release Button and Latch 4–10
FIGURE 5-1
Slide Release Latches 5–4
FIGURE 5-2
Locating the Metal Lever 5–5
FIGURE 5-3
Top Cover and Release Button 5–7
FIGURE 5-4
Removing the Front Bezel From the Server Chassis 5–8
FIGURE 5-5
Location of PCI-Express and PCI-X Card Slots 5–9
FIGURE 5-6
Location of PCI-Express and PCI-X Card Slots 5–10
FIGURE 5-7
PCI Card and Hold-Down Bracket 5–11
FIGURE 5-8
DIMM Locations 5–13
FIGURE 5-9
Ejecting and Removing the System Controller Card 5–18
FIGURE 5-10
Locating the System Configuration PROM 5–18
FIGURE 5-11
Motherboard Assembly 5–20
FIGURE 5-12
Cable Cutout 5–21
FIGURE 5-13
Location of the Screws in the Motherboard Assembly 5–22
FIGURE 5-14
Removing the Motherboard Assembly From the Server Chassis. 5–23
FIGURE 5-15
Installing the Motherboard Assembly 5–25
FIGURE 5-16
Securing the Motherboard Assembly to the Chassis 5–26
FIGURE 5-17
Location of Power Supply Latch 5–28
FIGURE 5-18
Location of Bus Bar Screws on the Power Distribution Board and the Motherboard
Assembly
5–29
FIGURE 5-19
Removing the Power Distribution Board 5–30
FIGURE 5-20
Installing the Power Distribution Board 5–31
FIGURE 5-21
Removing the LED Board From the Chassis 5–33
FIGURE 5-22
Removing the Fan Power Board 5–34
FIGURE 5-23
Removing the Fan Guard 5–35
FIGURE 5-24
Removing the Front I/O Board 5–36
FIGURE 5-25
Removing the SAS Disk Backplane 5–38
FIGURE 5-26
Replacing the SAS Disk Backplane 5–39
FIGURE 5-27
Removing the Battery From the System Controller 5–40