Fujitsu SPARC Enterprise T2000, Service Manual, Page: 65 / 174

Chapter 3 Server Diagnostics 3-25
3.3.4 Running the
showfru
Command
The
showfru
command displays information about the FRUs in the server. Use this
command to see information about an individual FRU, or for all the FRUs.
Note – By default, the output of the
showfru
command for all FRUs is very long.
●
At the
sc>
prompt, enter the
showfru
command.
In the following example, the
showfru
command is used to get information about
the motherboard (MB).
sc> showfru MB.SEEPROM
SEGMENT: SD
/ManR
/ManR/UNIX_Timestamp32: WED OCT 12 18:24:28 2005
/ManR/Description: ASSY,SPARC-Enterprise-T2000,CPU Board
/ManR/Manufacture Location: Sriracha,Chonburi,Thailand
/ManR/Sun Part No: 5016843
/ManR/Sun Serial No: NC00OD
/ManR/Vendor: Celestica
/ManR/Initial HW Dash Level: 06
/ManR/Initial HW Rev Level: 02
/ManR/Shortname: T2000_MB
/SpecPartNo: 885-0483-04
SEGMENT: FL
/Configured_LevelR
/Configured_LevelR/UNIX_Timestamp32: WED OCT 12 18:24:28 2005
/Configured_LevelR/Sun_Part_No: 5410827
/Configured_LevelR/Configured_Serial_No: N4001A
/Configured_LevelR/HW_Dash_Level: 03
.
.
.