Fujitsu PRIMERGY RX300 S7, Upgrade And Maintenance Manual

Page: 496 / 560

496 Upgrade and Maintenance Manual
RX300 S7
System board and components
– Heat sinks: see section "Installing processor heat sinks" on page 325
– Memory modules: see section "Installing a memory module" on
page 281
I
Install all memory modules into their original slots.
– Expansion cards: see section "Installing expansion cards" on page 191
I
Install all expansion cards into their original slots.
– UFM board: install the UFM spacer to the system board and install the
UFM board see section "Installing the UFM board" on page 456
– TPM board (if applicable): see section "Installing the TPM board" on
page 468
Ê
"Installing the power backplane" on page 133
Ê
"Installing the fan box" on page 184
Ê
"Installing the air duct" on page 74
Ê
"Mounting the server cover" on page 76
Ê
If applicable, activate TPM functionality in the system BIOS under Security >
TPM (Security Chip) Setting > Security Chip . For more information, refer to the
"D2939 BIOS Setup Utility for PRIMERGY RX300 S7 / TX120 S3 Reference
Manual".
Ê
"Sliding the server into the rack" on page 80
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page 77 .
Ê
Reconnect all external cables.
Ê
"Connecting the server to the power source" on page 81
Ê
"Closing the rack door" on page 84
Ê
"Updating or recovering the system board BIOS and iRMC" on page 92
Ê
"Verifying system information backup / restore" on page 94
Ê
"Verifying the system time settings" on page 103