Fujitsu PRIMERGY RX200 S2, User Manual

Page: 36 / 307

36
Chapter 1 Overview
3
Place the CD-ROM at the center of the tray.
While supporting the CD-ROM tray, push the tray until it clicks into position.
If the CD-ROM is placed improperly when the tray is pushed into the unit, the CD-ROM or the
drive may be damaged.
Be careful not to touch the lens of the CD-ROM drive.
4
Move the tray back.
Push the tray gently until it clicks into position.
Push the center of the CD-ROM unit bezel gently until the tray clicks into position.
■
Ejecting the CD-ROM
To eject the CD-ROM, press the CD-ROM eject button in the same way as steps 1 to 2 in "
■
Inserting
the CD-ROM" ( pg.35).
Label side up
CD-ROM tray
CD-ROM unit bezel