Fujitsu PRIMERGY RX200 S2, User Manual

Page: 61 / 307

61
PRIMERGY RX200 S2 User’s Guide
3
O
S
In
st
allation
U
sing ServerS
ta
rt
2
Add, remove, or modify partitions as necessary.
Partition size of the FAT file system
When "FAT" is selected in [File system] and a value equal to or more than 4095MB or "Auto-
matic setting" is specified in [Partition size], the size of created partitions will be 4095MB.
The following limits apply to the volume label length. A volume label longer than the limit may
be used. However, it can cause installation failure. Enter a volume label within the limit.
•FAT: Up to 11 byte characters
•NTFS: Up to 32 byte characters
Add a partition
1. Click [ADD].
The [Disk Configuration] window appears.
2. Set items and click [continue].
The new partition is added to the partition list.
Remove a partition
1. Select the partition to remove and click [REMOVE].
The partition is removed.
Modify the partition configuration
1. Select the partition to modify and click [MODIFY].
The [Disk Configuration] window appears.
2. Change items and click [continue].
The partition is modified.
3
Click [leave wizard] after settings are completed.
The disk wizard closes.