Fujitsu PRIMERGY RX200 S2 User Manual Download Page 125

Page: 125 / 307

125

PRIMERGY RX200 S2 User’s Guide

Manu

al O
S

allation

■

When a LAN Card is Added

The following window may appear at system startup after addition of a LAN card. Perform the

appropriate procedure according to the displayed window.

• When the "New Hardware Detection Wizard" window appears

Insert the driver disk created from the ServerStart CD-ROM and perform Step 6 and subsequent steps

in "Updating LAN Drivers".

• When the [Insert Disk] window prompts you to insert the "Intel PRO Adapter CD-ROM or floppy

disk" or "Intel® PRO/1000 Disk Driver".

Insert the driver disk created from the ServerStart CD-ROM and install the driver.

The "Digital signature was not found" message may appear. If it appears, click [Yes] to continue the

operations.

When the [Overwriting the Files] window appears, normally do not overwrite the files (select [Do not

overwrite all files]).

4.3.3 Latest Drivers

The latest drivers, refer to the Fujitsu PRIMERGY website (http://primergy.fujitsu.com).

Summary of Contents for PRIMERGY RX200 S2




















































































































































































































































































































Search results

Summary of Contents for PRIMERGY RX200 S2

Reviews:

Related manuals for PRIMERGY RX200 S2

Brands by name

Popular brands

Fujitsu PRIMERGY RX200 S2, User Manual

Search results

Summary of Contents for PRIMERGY RX200 S2

Reviews:

Related manuals for PRIMERGY RX200 S2

Brands by name

Popular brands