manualshive.com logo in svg

Fujitsu PRIMERGY RX200 S2, User Manual

The Fujitsu PRIMERGY RX200 S2, a robust and efficient server, comes with a Quick Start Manual providing comprehensive setup instructions. Easily downloadable for free from our website, this manual ensures a hassle-free installation process, guaranteeing optimal performance of this top-tier server. Get yours now at manualshive.com.

Share
Download
background image

150

Chapter 5  Operations after OS Installation

5.5.4 Notes on Advanced Uninterruptible Power Supply 

(UPS)

Note the following points when using an advanced uninterruptible power supply (referred to as UPS 

afterward).

■

UPS Shutdown Time Setting

Specify enough time for the UPS power-off time (time from the shutdown direction to the actual power-

off). If this time is set insufficiently, the power will be cut off before system shutdown, which may result 

in destruction of data. For more details, refer to the manuals for UPS and UPS management software.

■

Power Supply Control by UPS

Change BIOS settings as follows to power the server on automatically using the UPS management 

software (PowerChute Network Shutdown, PowerChute Business Editon) at power recovery or during 

scheduled operation. For details on how to set the BIOS Setup Utility, refer to "8.2 BIOS Setup Utility" 

(

pg.208).

1

Start the BIOS Setup Utility.

2

From the [Advanced] menu, select the [Power On/Off] submenu and press the 

[Enter] key.

The [Power On/Off] submenu window appears.

3

Set the [Power Failure Recovery] to [Always On].

"8.2.9 Power On/Off Submenu" (pg.221)

5.5.5 Turning the Power On/Off via a LAN

You can turn the power on/off the server from a client (via a LAN) by utilizing the Wakeup on LAN 

(WOL) function.

Be sure to install ServerView to control the power supply via a LAN.

When ServerView is not installed, the server is not turned off automatically after OS shutdown.

When the power cable is disconnected from the server or the server is powered off due to power 

interruption, restart the server. Unless the server is restarted, the WOL function will be disabled.

Only the onboard LAN supports the WOL function on this server. Make sure you connect the onboard 

LAN to a control power supply via a LAN.

Summary of Contents for PRIMERGY RX200 S2




















































































































































































































































































































Reviews:

No comments

Related manuals for PRIMERGY RX200 S2

IBM B50 Service Manual preview
B50
Brand: IBM Pages: 198
IBM QS21 - BladeCenter - 0792 Installation And User Manual preview
QS21 - BladeCenter - 0792
Brand: IBM Pages: 110
Patton electronics 29XX Series Administrator'S Reference Manual preview
29XX Series
Brand: Patton electronics Pages: 326
Galleon NTS-6001 Configuration Manual preview
NTS-6001
Brand: Galleon Pages: 47
LaCie 301297U - 1TB Ethernet Disk XP Embedded Network Attached... Online Manual preview
301297U - 1TB Ethernet Disk XP Embedded Network Attached...
Brand: LaCie Pages: 67
Sun Microsystems Sun Fire X2100 M2 Service Manual preview
Sun Fire X2100 M2
Brand: Sun Microsystems Pages: 128
Conceptronic C54PSERVUM User Manual preview
C54PSERVUM
Brand: Conceptronic Pages: 127
HIKVISION NVR Server User Manual preview
NVR Server
Brand: HIKVISION Pages: 13
Supero SuperServer 6026TT-HIBQF User Manual preview
SuperServer 6026TT-HIBQF
Brand: Supero Pages: 112
xFusion Digital Technologies FusionServer 1288H V5 Technical Paper preview
FusionServer 1288H V5
Brand: xFusion Digital Technologies Pages: 96
IBM System x3610 User Manual preview
System x3610
Brand: IBM Pages: 90
NEC 120Ra-1 Installation Manual preview
120Ra-1
Brand: NEC Pages: 12
NEC 120Rf-2 Product Manual preview
120Rf-2
Brand: NEC Pages: 20
NEC 120Le Installation Instructions Manual preview
120Le
Brand: NEC Pages: 16
NEC EXP320J User Manual preview
EXP320J
Brand: NEC Pages: 504
NEC 120Rg-2 Getting Started Manual preview
120Rg-2
Brand: NEC Pages: 2
QNAP TS-1232XU User Manual preview
TS-1232XU
Brand: QNAP Pages: 55
Sony VGF-HS1 - Vaio Home Server Specifications preview
VGF-HS1 - Vaio Home Server
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands