Fujitsu PRIMERGY RX100 S8, Upgrade And Maintenance Manual, Page: 258 / 296

258 Upgrade and Maintenance Manual
RX100 S8
System board and components
Ê
Open Bitlocker Drive Encryption by clicking the
Start
button, clicking
Control Panel
, clicking
Security
, and then clicking
Bitlocker Drive
Encryption .
I
Administrator permission required If you are prompted for an
administrator password or confirmation, type the password or
provide confirmation.
Ê
To turn off BitLocker and decrypt the volume, click Turn Off BitLocker , and
then click Decrypt the volume .
I
Decrypting the volume may be time-consuming. By decrypting the
volume, all of the information stored on that computer is decrypted.
For further information on how to disable BitLocker drive encryption,
please refer to the Microsoft Knowledge Base.
Fujitsu service partners will find additional information (also available
in Japanese) on the Fujitsu Extranet web pages.
Ê
Disable TPM in the system board BIOS. Proceed as follows:
Ê
Switch on or restart your server.
Ê
As soon as the startup screen appears, press the
[F2]
function key to
enter the BIOS.
Ê
Select the Advanced menu.
Ê
Select the Trusted Computing submenu.
Ê
Set the TPM Support and TPM State settings to Disabled .
Ê
Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify
settings, refer to the corresponding BIOS Setup Utility reference
manual.
Ê
"Disabling BitLocker functionality" on page 63
Ê
"Shutting down the server" on page 45
Ê
"Disconnecting the server from the mains" on page 46
Ê
"Getting access to the component" on page 47