manualshive.com logo in svg

Fujitsu MAX3036RC SERIES, Specifications

The Fujitsu MAX3036RC Series is a high-performance hard drive designed for optimal reliability and speed. Delivering exceptional storage capacity and data transfer rates, this product is perfect for demanding applications. To learn more about its Specifications and to download the user manual for free, visit manualshive.com.

Share
Download
background image

Contents 

xiv 

C141-C012

 

Tables 

Table 1.1  SAS address format ...............................................................................1-9

 

Table 1.2  Hashed SAS address code parameter ..................................................1-10

 

Table 1.3  Usage of special characters .................................................................1-11

 

Table 1.4  OOB signal timing specifications........................................................1-13

 

Table 1.5  OOB signal transmitter requirements..................................................1-14

 

Table 1.6  OOB signal receiver burst time detection requirements .....................1-15

 

Table 1.7  OOB signal receiver idle time detection requirements .......................1-15

 

Table 1.8  OOB signal receiver negation time detection requirements................1-15

 

Table 1.9  SAS speed negotiation sequence timing specifications ......................1-19

 

Table 1.10  Primitives not specific to type of connection ....................................1-24

 

Table 1.11  Primitives used only inside SSP and SMP connections ....................1-26

 

Table 1.12  Primitive sequences ...........................................................................1-27

 

Table 1.13  OPEN_REJECT abandon primitives.................................................1-31

 

Table 1.14  OPEN_REJECT retry primitives.......................................................1-32

 

Table 1.15  DONE primitives ...............................................................................1-35

 

Table 1.16  Clock skew management ALIGN insertion requirement ..................1-37

 

Table 1.17  Scrambling for different data dword types........................................1-38

 

Table 1.18  Address frame format ........................................................................1-39

 

Table 1.19  IDENTIFY address frame format......................................................1-40

 

Table 1.20  DEVICE TYPE field .........................................................................1-40

 

Table 1.21  OPEN address frame format..............................................................1-42

 

Table 1.22  PROTOCOL field ..............................................................................1-42

 

Table 1.23  CONNECTION RATE field..............................................................1-43

 

Table 1.24  ARBITRATION WAIT TIME field..................................................1-44

 

Table 1.25  Connection responses ........................................................................1-47

 

Table 1.26  Arbitration priority for OPEN address frames passing on a 

physical link ......................................................................................1-48

 

Table 1.27  Abort connection responses...............................................................1-49

 

Table 1.28  Close connection responses ...............................................................1-50

 

Table 1.29  Break connection responses...............................................................1-51

 

Table 1.30  Rate matching ALIGN and/or NOTIFY insertion requirements.......1-52

 

Table 1.31  SSP frame interlock requirements .....................................................1-54

 

Table 1.32  SSP frame format...............................................................................1-58

 

Table 1.33  FRAME TYPE field ..........................................................................1-59

 

Table 1.34  COMMAND information unit...........................................................1-61

 

Table 1.35  TASK ATTRIBUTE field .................................................................1-62

 

Table 1.36  TASK information unit......................................................................1-64

 

Table 1.37  TASK MANAGEMENT FUNCTION field......................................1-65

 

Table 1.38  XFER_RDY information unit ...........................................................1-66

 

Table 1.39  An example of requested offset .........................................................1-68

 

Table 1.40  DATA information unit .....................................................................1-69

 

Table 1.41  RESPONSE information unit ............................................................1-72

 

Summary of Contents for MAX3036RC SERIES

















































































































































































































































































































































































































Reviews:

No comments

Related manuals for MAX3036RC SERIES

Kanguru Defender Basic Quick Start Manual preview
Defender Basic
Brand: Kanguru Pages: 17
Qsan Technology XCubeSAN XS5224D Hardware Manual preview
XCubeSAN XS5224D
Brand: Qsan Technology Pages: 143
LaCie 4big Spare Drive Quick Install Manual preview
4big Spare Drive
Brand: LaCie Pages: 24
US Robotics USR8700 User Manual preview
USR8700
Brand: US Robotics Pages: 156
GrainPro Cocoon Indoor Instruction Manual preview
Cocoon Indoor
Brand: GrainPro Pages: 19
Onnto RS-M4QO User Manual preview
RS-M4QO
Brand: Onnto Pages: 40
Seagate HAWK 4 Product Manual preview
HAWK 4
Brand: Seagate Pages: 68
Seagate ST52160N Installation Manual preview
ST52160N
Brand: Seagate Pages: 40
IBM Storwize V3700 Quick Installation Manual preview
Storwize V3700
Brand: IBM Pages: 82
LaCie 301297U - 1TB Ethernet Disk XP Embedded Network Attached... Online Manual preview
301297U - 1TB Ethernet Disk XP Embedded Network Attached...
Brand: LaCie Pages: 67
Quictent WGB-01 User Manual preview
WGB-01
Brand: Quictent Pages: 24
Weka 607.0602.00.00 Assembly, User And Maintenance Instructions preview
607.0602.00.00
Brand: Weka Pages: 28
kincrome K8114 Manual preview
K8114
Brand: kincrome Pages: 2
Addonics Technologies ST55HPMXU User Manual preview
ST55HPMXU
Brand: Addonics Technologies Pages: 9
INTILION scalebloc 0.5C Operating Manual preview
scalebloc 0.5C
Brand: INTILION Pages: 121
SanDisk 2GB - 2GB Micro Secure Digital Card Product Manual preview
2GB - 2GB Micro Secure Digital Card
Brand: SanDisk Pages: 26
dellonda DG114 Manual preview
DG114
Brand: dellonda Pages: 22
QNAP TVS- 72XU Series User Manual preview
TVS- 72XU Series
Brand: QNAP Pages: 56

Brands by name

Popular brands

Load more brands