manualshive.com logo in svg

Fujitsu MAX3036RC SERIES, Specifications

The Fujitsu MAX3036RC Series is a high-performance hard drive designed for optimal reliability and speed. Delivering exceptional storage capacity and data transfer rates, this product is perfect for demanding applications. To learn more about its Specifications and to download the user manual for free, visit manualshive.com.

Share
Download
background image

 

Index 

C141-C012 

IN-5 

LOG SELECT (4C) .................................4-91 
LOG SELECT command 

parameter configuration......................4-92 

LOG SENSE (4D)....................................4-95 
LogErr ......................................................4-66 
logical block address..................................2-4 
logical block addressing...........................2-23 
logical block cache segment size .............4-51 
logical or physical notch ..........................4-58 
logical unit reserve function ....................4-86 
LOGICAL UNIT RESET ........................2-17 
LOGICAL UNIT RESET ........................2-18 
logical unit scope ...................................4-131 
logical unit self-test................................4-181 
logical/physical address 

conversion..................4-179, 4-180, 4-185 

look-ahead cache feature ...........................3-4 
look-ahead operation..................................3-7 
look-ahead volume.....................................3-7 
LP ............................................................4-95 
LPN ..........................................................4-58 

M

 

maintenance command ..........................4-174 
maximum burst size .................................4-38 
maximum number of notch......................4-58 
maximum pre-fetch..................................4-50 
maximum pre-fetch control block 

count....................................................4-51 

media type...................................... 4-24, 4-80 
method of reporting informational 

exception.............................................4-67 

microcode download with offset, 

with saving........................................4-192 

microcode download with offset, 

without saving...................................4-191 

microcode download, with saving .........4-190 
microcode download, without 

saving ................................................4-190 

minimum pre-fetch ..................................4-50 
mode = 0, 0, 0, 0 ........................ 4-188, 4-194 
mode = 0, 0, 0, 1 ........................ 4-189, 4-195 
mode = 0, 0, 1, 0 ........................ 4-190, 4-195 
mode = 0, 0, 1, 1 ....................................4-196 
mode = 0, 1, 0, 0 ....................................4-190 
mode = 0, 1, 0, 1 ....................................4-190 

mode = 0, 1, 1, 0.................................... 4-191 
mode = 0, 1, 1, 1.................................... 4-192 
mode = 1, 0, 1, 0.........................4-192, 4-196 
mode = 1, 0, 1, 1.................................... 4-197 
mode page ............................................... 4-76 
MODE SELECT (15) .............................. 4-19 
MODE SELECT command..............4-23, 6-5 
MODE SELECT EXTENDED 

(55) ..................................................... 4-73 

MODE SELECT EXTENDED 

command parameter 
configuration ...................................... 4-74 

MODE SELECT parameter..................... 4-26 

read/write error recovery 

parameter....................................... 4-28 

MODE SELECT parameter...........4-39, 4-43,  

4-45, 4-47, 4-53, 4-57, 4-66,  
4-70, 4-72 

MODE SELECT parameter of 

IDD..................................................... 4-26 

MODE SELECT parameter 

structure.............................................. 4-21 

MODE SENSE (1A) ............................... 4-75 
MODE SENSE command 

parameter configuration ..................... 4-79 

MODE SENSE data type 

specification ....................................... 4-77 

MODE SENSE EXTENDED (5A) ......... 4-82 
MODE SENSE EXTENDED 

command parameter 
configuration ...................................... 4-83 

MRIE ..............................................4-67, 4-68 
MS ........................................................... 4-48 
multiple selection .................................... 4-48 

N

 

NAK ........................................................ 1-36 
name and identifier.................................... 1-9 
ND ........................................................... 4-58 
negative acknowledgement ..................... 1-36 
non cache buffer size............................... 4-52 
non-medium error count page 

(X'06')............................................... 4-110 

notch drive............................................... 4-58 
notch parameter ....................................... 4-57 
NOTIFY .................................................. 1-30 
number of head........................................ 4-44 

Summary of Contents for MAX3036RC SERIES

















































































































































































































































































































































































































Reviews:

No comments

Related manuals for MAX3036RC SERIES

LaCie Brick User Manual preview
Brick
Brand: LaCie Pages: 29
Ice-O-Matic B100 Service & Parts Manual preview
B100
Brand: Ice-O-Matic Pages: 9
PaloAlto Networks M-300 Quick Start Manual preview
M-300
Brand: PaloAlto Networks Pages: 2
Wanroy WY51100 User Manual preview
WY51100
Brand: Wanroy Pages: 24
SanDisk Mobile Ultra Memory Stick Micro User Manual preview
Mobile Ultra Memory Stick Micro
Brand: SanDisk Pages: 1
welland NetShare GX ME-752GNS Quick Install Manual preview
NetShare GX ME-752GNS
Brand: welland Pages: 3
Maxtor SATAII/300 INTERNAL HARD DRIVE Installation Manual preview
SATAII/300 INTERNAL HARD DRIVE
Brand: Maxtor Pages: 19
Conrad 417620 Operating Instructions preview
417620
Brand: Conrad Pages: 4
Panasonic RP-SM16GFE1K Operating Instructions Manual preview
RP-SM16GFE1K
Brand: Panasonic Pages: 18
RAILBLAZA Tackle Caddy Console Assembly Instructions preview
Tackle Caddy Console
Brand: RAILBLAZA Pages: 2
QNAP TS-230 User Manual preview
TS-230
Brand: QNAP Pages: 44
Philips Swarovski LOCK IN FM01SW60/27 Specifications preview
Swarovski LOCK IN FM01SW60/27
Brand: Philips Pages: 2
Philips Swarovski FM01SW21/27 Specifications preview
Swarovski FM01SW21/27
Brand: Philips Pages: 2
Philips SPE9025CC Specification Sheet preview
SPE9025CC
Brand: Philips Pages: 2
Philips Swarovski FM01SW21/00 Specifications preview
Swarovski FM01SW21/00
Brand: Philips Pages: 2
Philips SPE9000CC Series Specifications preview
SPE9000CC Series
Brand: Philips Pages: 2
Philips SPE9020CC Specifications preview
SPE9020CC
Brand: Philips Pages: 2
Philips SPE9010 User Manual preview
SPE9010
Brand: Philips Pages: 23

Brands by name

Popular brands

Load more brands