manualshive.com logo in svg

Fujitsu MAX3036RC SERIES, Specifications

The Fujitsu MAX3036RC Series is a high-performance hard drive designed for optimal reliability and speed. Delivering exceptional storage capacity and data transfer rates, this product is perfect for demanding applications. To learn more about its Specifications and to download the user manual for free, visit manualshive.com.

Share
Download
background image

Contents 

xviii 

C141-C012

 

Table 4.101  REPORT DEVICE IDENTIFIER parameter list ..........................4-141

 

Table 4.102  SET DEVICE IDENTIFIER parameter list...................................4-143

 

Table 4.103  Defect list format ...........................................................................4-155

 

Table 4.104  FORMAT UNIT command parameter list configuration..............4-156

 

Table 4.105  Defect descriptor:  byte distance from index format.....................4-159

 

Table 4.106  Defect descriptor:  physical sector address format........................4-160

 

Table 4.107  FORMAT UNIT command defect processing  .............................4-162

 

Table 4.108  REASSIGN BLOCK command:  defect data list 

configuration .................................................................................4-165

 

Table 4.109  Defect data type .............................................................................4-168

 

Table 4.110  Defect data format .........................................................................4-169

 

Table 4.111  READ DEFECT DATA command:  defect data configuration ....4-169

 

Table 4.112  Defect data conditions ...................................................................4-171

 

Table 4.113  READ DEFECT DATA command (B7):  defect data 

configuration .................................................................................4-174

 

Table 4.114  Self-diagnosis test..........................................................................4-175

 

Table 4.115  Error recovery control flags during the self-diagnosis test ...........4-176

 

Table 4.116  SEND DIAGNOSTIC command:  parameter list 

configuration .................................................................................4-178

 

Table 4.117  Page code .......................................................................................4-178

 

Table 4.118  SEND DIAGNOSTIC parameters:  page code list........................4-179

 

Table 4.119  SEND DIAGNOSTIC parameters:  logical/physical address 

conversion .....................................................................................4-180

 

Table 4.120  Specifying address format .............................................................4-180

 

Table 4.121  SELF-TEST ...................................................................................4-181

 

Table 4.122  RECEIVE DIAGNOSTIC RESULTS command: response 

data configuration..........................................................................4-183

 

Table 4.123  RECEIVE DIAGNOSTIC RESULTS response data:  page 

code list .........................................................................................4-184

 

Table 4.124  RECEIVE DIAGNOSTIC RESULTS response data:  

logical/physical address conversion..............................................4-185

 

Table 4.125  Address format ..............................................................................4-186

 

Table 4.126  WRITE BUFFER transfer mode ...................................................4-188

 

Table 4.127  WRITE BUFFER command:  buffer data (mode = 000, 001) ......4-189

 

Table 4.128  READ BUFFER transfer mode .....................................................4-193

 

Table 4.129  READ BUFFER command:  buffer data (mode = 0000, 0001) ....4-194

 

Table 4.130  READ BUFFER command: buffer descriptor...............................4-196

 

Table 4.131  READ BUFFER command:  echo buffer descriptor .....................4-197

 

Table 5.1  Expanded sense data format ..................................................................5-2

 

Table 5.2  Sense key inherent information .............................................................5-5

 

Table 5.3  Sense key ...............................................................................................5-6

 

Table 5.4  Additional Sense Code and Additional Sense Code Qualifier ..............5-7

 

Table 5.5  Sense data error classification .............................................................5-17

 

Table 5.6  Error recovery processing procedures  ................................................5-20

 

Table 5.7  Disk drive errors and number of retries...............................................5-29 

Summary of Contents for MAX3036RC SERIES

















































































































































































































































































































































































































Reviews:

No comments

Related manuals for MAX3036RC SERIES

IBM System Storage DS4000 Hardware Maintenance Manual preview
System Storage DS4000
Brand: IBM Pages: 184
Kanguru Defender Basic Quick Start Manual preview
Defender Basic
Brand: Kanguru Pages: 17
IBM EXN4000 Installation And Setup Instructions preview
EXN4000
Brand: IBM Pages: 18
Schaffner HOLZLAGER 7021 Assembly Instructions preview
HOLZLAGER 7021
Brand: Schaffner Pages: 4
Maxtor QUICKVIEW 300 Product Manual preview
QUICKVIEW 300
Brand: Maxtor Pages: 73
Husky H4TR2R Use And Care Manual preview
H4TR2R
Brand: Husky Pages: 7
Freecom DLT-V4 EZ-Kit Series Datasheet preview
DLT-V4 EZ-Kit Series
Brand: Freecom Pages: 2
Infrant Technologies ReadyNAS 600B Installation Manual preview
ReadyNAS 600B
Brand: Infrant Technologies Pages: 2
Infrant Technologies ReadyNAS NV Getting Started Manual preview
ReadyNAS NV
Brand: Infrant Technologies Pages: 8
Palram Skylight Shed-6x3 Assembly Instructions Manual preview
Skylight Shed-6x3
Brand: Palram Pages: 35
Sony Microdrive RHMD2G Operating Instructions preview
Microdrive RHMD2G
Brand: Sony Pages: 2
Sony Memory Stick PRO DUO MSX-M256S Operating Instructions preview
Memory Stick PRO DUO MSX-M256S
Brand: Sony Pages: 2
Sony Memory Stick MSA-32A Operating Instructions preview
Memory Stick MSA-32A
Brand: Sony Pages: 2
Sony Memory Card DKA-MC10F Operating Instructions preview
Memory Card DKA-MC10F
Brand: Sony Pages: 2
Sony M2 MS-A Series Operating Instructions preview
M2 MS-A Series
Brand: Sony Pages: 2
Sony IJ1001SNBT Manual preview
IJ1001SNBT
Brand: Sony Pages: 19
Sony IJ1001C User Manual preview
IJ1001C
Brand: Sony Pages: 24
Sony MAV-S2000 Operation Manual preview
MAV-S2000
Brand: Sony Pages: 24

Brands by name

Popular brands

Load more brands