Chapter 8 Operational Settings
119
Item
Description
Parameter/Value
Factory Default
Multifeed
Specify a method for multifeed detection. Detect
multifeeds by monitoring the overlap, document
length, or the combination of both.
This setting can also be configured in the
scanner driver. Note that priority is given to the
scanner driver setting.
None/Check Overlapping (Ultrasonic)/Check
Length/Check Overlapping and Length
Length (When [Check Length] is specified:
Select from 10/15/20 mm)
None
Length: 10 mm
Page Edge Filler (ADF)
Specify a width for the margin around the
scanned image to fill the margin in white.
This setting can also be configured in the
scanner driver. In that case, Page Edge Filler of
the scanner driver is used on the output image.
Top/Left/Right: 0 to 15 mm
Bottom: -7 to 7 mm
(in increments of 1)
(A: image, B: filled area, A+B: output)
Top/Bottom/Left/
Right: 0 mm
Dropout color
Select a color to be removed from the scanned
image (only available in black & white or
grayscale mode).
This setting can also be configured in the
scanner driver. Note that priority is given to the
scanner driver setting.
Red/Green/Blue/None
Green
Document check area specification
for Multifeed Detection
Selected range: Select this item to restrict the
area to detect multifeed.
[Selected range] check box
Not selected
Enable/Disable (Middle): Specify whether to
enable or disable multifeed detection in the
selected area.
Enable/Disable
(When [Selected range] is selected)
Disable
Start (Middle): Specify the start position of the
area in length (mm) from the leading edge of the
document.
0 to 510 mm (in increments of 2)
0 mm
End (Middle): Specify the end position of the area
in length (mm) from the leading edge of the
document.
0 to 510 mm (in increments of 2)
0 mm
