Chapter 2 How to Load Documents
34
How to Load Documents
1
Pull out the chute extensions according to the length of
the documents.
For details, refer to
"1.5 Setting Up the ADF Paper Chute (Feeder)"
2
Bring down the stacker and slide out the stacker
extension towards you according to the length of the
documents.
For details, refer to
"1.6 Setting Up the Stacker" (page 23)
.
3
Load documents in the ADF paper chute (feeder).
Load the documents face-down in the ADF paper chute (feeder).
4
Adjust the side guides to the width of the documents.
Do not leave space between the side guides and the documents.
Otherwise, the documents may be fed skewed.
5
Scan the documents with the image scanning application.
For details, refer to the image scanning application manual.
ATTENTION
Remove all paper clips and staples.
Reduce the number of sheets if a multifeed or pick error occurs.
Side Guides
