Fujitsu AO*G09KXCA Series, Service Instruction

Page: 19 / 110

01-15
When the time erapsed 30 min, after compressor stopped, and whren the outdoor heat exchanger
temperature sensor detects lower temperature, the preheating starts.
When the operation starts, the preheating stops.
The preheating does not oeprate when the system is stopped with Error of permanent stop.
18. COMPRESSOR PREHEATING
) g n it a e h e r P r o s s e r p m o C : 3 1 . g i F (
7°C
5°C
19. 10°C HEAT OPERATION
The 10°C HEAT operation functions by pressing 10°C HEAT button on the remote controller.
The 10°C HEAT operation is almost the same operation as below settings.
Mode Heating
Setting temperature 10°C
Fan mode Lo (AUTO)
( Table13 )
20. ECONOMY OPERATION
The ECONOMY operation functions by pressing ECONOMY button on the remote controller.
The ECONOMY operation is almost the same operation as below settings.
Mode Cooling/ Dry Heating
Target temperature Setting temp.+1°C Setting temp.-1°C
( Table14)
0°C
C ° 2 -
-2°C
C ° 4 -
OFF
OFF
ON
ON
14°C
C ° 2 1
0°C
C ° 2 -
-2°C
C ° 4 -
OFF
ON
ON
ON
JUMPER (J600) removed
When the 10°C HEAT operation is operating, the ECONMY indicator turns ON.