Fujitsu AO*G09KXCA Series, Service Instruction

Page: 68 / 110

Forecast of Cause:
1. Indoor unit Controller PCB failure
2. Wireless LAN adapter PCB failure
3. Wiring connection failure
Wireless LAN adapter Non-Energized
Trouble shooting 30
INDOOR UNIT Error Method:
Detective Actuators: Detective details:
Indicate of Display:
Indoor Unit :
Operation indicator: 1 time Flash
Timer indicator : 8 time Flash
Wireless LAN adapter :
LED 1 (Green) : OFF
LED 2 (Orange) : OFF
Indoor unit Controller PCB
Wireless LAN adapter PCB When the does not output the DC12 voltage from Controller PCB.
OK
Check Point 2 : Check the connection
Check any loose or removed connection of between the Wireless LAN adapter PCB and Controller PCB
>If there is abnormal condition, correct it.
Check the connection condition on the Controller PCB
>If there is loose connector, open cable or miswiring, correct it.
Check Point 3 : Check the
Wireless LAN adapter PCB and Controller PCB
Check Voltage at CN12 (terminal 1-2) of Controller PCB.
>If it is DC 0V, Controller PCB is failure.
Replace Controller PCB.
>If it is DC12V, Wireless LAN adapter PCB failure.
Replace Wireless LAN adapter and please cancel the air conditioner of the registration on the Mobile App.
After the replace adapter, Please perform the pairing on the App.
>>Air conditioning unregistration method, refer to page “02 - 36 ”
>>Pairing method, refer to page “02 - 37 ”
Error code : [ E : 18 ]
Economy indicator: Continuous Flash
NO
Check Point 1 : Check the Sleep mode
Press the Wireless LAN adapter setting button the 3 seconds or more.
Wireless LAN adapter : LED 1 (Green) : Flashing Fast , LED 2 (Orange) : Flashing Fast
Did the display pattern will change?
YES
To “Trouble shooting 29”
02-35