Fujitsu AO*G09KXCA Series, Service Instruction

Page: 100 / 110

19. Room temperature thermistor removal
1. Disconnect the connector
of Main PCB. ( CN4 / White )
Start from removing rail cover.
2. Remove the screw and
thermistor case.
3. Remove the Room
temperature thermistor.
21. Pipe temperature thermistor removal
Start from removing main frame.
1. Remove the screws ( 3 places )
and earth wire.
1. Disconnect the connector
of Main PCB. ( CN19 / White )
Start from removing main frame.
2. Remove the screws.
( 3 places )
3. Bend the gear unit side panel slightly.
Remove the Plasma unit.
20. Plasma unit removal
2. Remove the Side cover.
Tips!
3. Remove the Thermistor spring and
Pipe temperature thermistor.
Before servicing the unit, turnings off all power supplies.
Then, do not touch the electric parts for 10 minutes due to the risk of electric shock.
04-10
Pipe temperature thermistor can be removed without removing Side cover.