background image

Our continuing commitment to quality products may mean a change in specifications without notice. 

©2019-2020 

 

19001 Kermier Rd., Waller, TX 77484

www.daikincomfort.com

INST

ALLA

TION INSTR

UC

TION

S

P

ackaged

 a

ir

 c

onditioner

 a

nd

 H

eat

 P

umP

 u

nit

 3-6 t

on

 

H

igH

 e

fficiency

 L

igHt

 c

ommerciaL

 drc/drH m

odeLs

Installation Instructions

IOD-1032B

7/

 

2020

Only personnel that have been trained to install, adjust, service or 

repair(hereinafter, “service”) the equipment specified in this manual 

should service the equipment.  The manufacturer will not be responsible 

for any injury or property damage arising from improper service or service 

procedures.  If you service this unit, you assume responsibility for any 

injury or property damage which may result.  In addition, in jurisdictions 

that require one or more licenses to service the equipment specified in 

this manual, only licensed personnel should servise the equipment.  

 

Improper installation, adjustment, servicing or repair of the equipment 

specified in this manual, or attempting to install, adjust, service or repair 

the equipment specified in this manual without proper training may result 

in product damage, property damage, personal injury or death.

WARNING

INDEX

Replacement Parts..........................................................2

Safety Instructions........................................................2

General Information.......................................................3

Unit Location....................................................................4

Clearances.......................................................................5

Roof Curb Post-Installation Checks..........................5

Roof Top Duct Connections..........................................5

Rigging Details.................................................................6

Electrical Wiring............................................................7

Circulating Air And Filters...........................................9

Condensate Drain Connection......................................9

Startup, Adjustments, And Checks............................10

Air Flow Adjustments...................................................11

Heat Pump Operation.....................................................15

Maintenance...................................................................16

Appendix A Blower Performance Tables.................17

Appendix B Electrical Data........................................33

Appendix C Unit Dimensions.........................................46

Appendix D Air Flow For Electric Heat....................47

Wiring Diagrams............................................................48

Startup Checklist ..........................................................54

WARNING

PROP 65 WARNING 

FOR CALIFORNIA CONSUMERS

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

0140M00517-A

Summary of Contents for DRC036

























































Reviews: