FujiFilm X-Pro1, Service Manual

Page: 86 / 132

Confidential: FUJIFILM Service Center Use Only
X-Pro1 Service Manual
3-26
3-13. [F5]:Camera Adjustment
[Adjustment environment and precautions]
•
Darken the surroundings during adjustments (a darkroom environment is ideal). Alternatively, prepare a box that is painted
black on the inside and perform the adjustments with the camera enclosed in the box. Please be careful so that a fluorescent
light does not enter. Please be careful so that a fluorescent light does not enter.
•
Calibrate the pattern box before the adjustment.
•
Any soiling on the pattern box dispersion plate or reflective plate will result in unevenness in the lighting and cause errors
during adjustment. Take care to carry out periodic pattern box cleaning and testing.
•
Check that Level Adjustment(Normal temperature) and CMOS Defect Correction have finished.
• When removing / mounting jig lens, please note the dust from entering.
[Required items]
Camera fixing jig If there are no problems with the adjustment environment, a tripod or X-Y
stage can be used.
PTB450F Pattern box
LB145 filter ZJ00699-100
NP-W126 Battery jig ZJ01936-100
FUJINON LENS XF35mm F1.4 R ---
<Settings for Camera Adjustment>
<Step 1>
In the adjustment item select screen, select [F5]: Camera Adjustment.
<Step 2>
[Preparing the camera adjustment pattern box]
(1) Stick the LB145 filter in the center of the pattern box.
(2) Use a color temperature meter to set the color
temperature to 6100 ± 50K.
(3) Use a luminance meter to set the luminance to 160 ± 5
cd/m
2
.
* Because adjustments to one setting will skew the other
setting, the color temperature and luminance should be
cross-checked a number of times. (Repeat steps 2 and 3
several times.)
(4) Remove the LB145 filter and fix the camera onto the XY
stage or tripod so that it is facing the pattern box.
When you have completed the preparations, press the [Enter]
key to proceed.
Camera Adjustment
<Preparations>
(1) Prepare the LB145 filter.
(2) Adjust the color temperature of the pattern box (PTB450)
to 6100+-50K.
(3) Adjust the luminance of the pattern box (PTB450)
to 160+-5cd/m
2
.
(4) Fix the camera on a tripod and set it in front of the
pattern box.
When preparations (1) - (4) are complete,
press the [Enter] key on the PC.
-->Lens is extended when the [Enter] key is pressed.
Pattern box
Camera
Filter(LB145)
Maximum
6mm
Maximum
6mm
Centerline Centerline
Revised:13.April.2012