FujiFilm X-Pro1, Service Manual

Page: 114 / 132

Confidential: FUJIFILM Service Center Use Only
X-Pro1 Service Manual
4-14
[NG]
If the inspection is NG, the window in the right will appear showing
the location of dusts.
(1) Check the location of dusts and close the window.
(2) Remove dusts and inspect again.
* The captured image is saved in
C:\X-Pro1_W_DustInspection\SCRIPT\LX10\GOMI\JPG.
<Step 7>
(1) Turn the camera off.
(2) Disconnect the USB cable from the camera.
[Note]
In a normal environment, dusts could stick to the CMOS surface.
Therefore, customers could complain about dusts on the CMOS and ask you to remove them again just after you have removed the
dusts and they use their cameras.
In order to prepare such cases, we recommend you to take pictures before and after you clean the CMOS. Depending on cases, we
think you need to show those pictures to customers.


: Revised