FujiFilm X-Pro1, Service Manual

Page: 70 / 132

Confidential: FUJIFILM Service Center Use Only
X-Pro1 Service Manual
3-10
3-6. QR Code reader
（
ZJ01134-100
）
Setup
Initialize the QR code reader used to carry out the LENS DATA read.
1. Connect the QR code reader to the USB port on the
PC.
2. Wait until the PC recognizes the QR code reader (the
QR code reader emits a beep).
3. Use the QR code reader to scan in the "Add CR
Suffix" provided in "Suffix Selection" in the instruction
manual supplied with the QR code reader.
4. Scanning method
(1) Hold the "Add CR Suffix" bar code so that it is lit
by the aiming beam of the QR code reader (at a
distance of around 5 cm).
(2) Press the switch on the QR code reader.
* The instruction manual is provided in several languages.
Use the section provided in any language for the setting.
* Refer to the instruction manual for detailed information on
using the QR code reader.
3-7. Using the Adjustment Software
Menu Command Details
Application Exit (Alt+F4) Terminate HyperFFW
Script Open Do not use
Load Do not use
Execute Do not use
Pause Do not use
About (Ctrl+A) Cancels execution
Edit Do not use
Mode Do not use
Watch variables Do not use
Tool Do not use
Option Do not use
Help Do not use
It is only possible to exit HyperFFW when the "x" circled in
red can be clicked.
To exit HyperFFW during the adjustment, select About
(Ctrl+A) and then select Exit (Alt+F4).
Add CR Suffix