FujiFilm X-Pro1, Service Manual

Page: 71 / 132

Confidential: FUJIFILM Service Center Use Only
X-Pro1 Service Manual
3-11
3-8. Launching the Adjustment Software
3-8-1. Launching the Adjustment Software when MAIN PWB Initialize
<Step 1>
Start
↓
Programs
↓
FUJIFILM REPAIR SERVICE
↓
X-Pro1_W Adjustment Software
↓
X-Pro1_W
（
BOOT
）
The adjustments are the same whichever option is selected.
<Step 2>
If adjustment stops at the window shown on the right, press
the [Enter] key to proceed.
<Step 3>
[Repair site ID input]
The first time the adjustment software is launched, a window
appears where you select the repair site ID recorded in the
camera during End Setting.
In this window, select the appropriate repair site.
E.g.: USA -> Press "A" on the keyboard.
* Once this has been set, this window no longer appears on
the PC.
* To reset the repair site ID, exit the adjustment software and
then delete C:\X-Pro1_W\base.txt.
Repair site ID input
0: SAPPORO A: USA F: BRITAIN Z: OTHERS
2: KURIHARA B: CANADA G: GERMANY
3: TOKYO C: HAWAII H: FRANCE
I: SPAIN
5: OSAKA D: TAIWAN J: ITALY
8: FUKUOKA T: CHINA K: NETHERLANDS
Q: SINGAPORE L: BELGIUM
M: SWEDEN
N: SWITZERLAND
O: NORWAY
P: FINLAND