FujiFilm X-Pro1, Service Manual

Page: 80 / 132

Confidential: FUJIFILM Service Center Use Only
X-Pro1 Service Manual
3-20
3-11. [L]:Level Adjustment(Normal temperature)
[Adjustment environment and precautions]
• Adjust the lighting to give a brightness of 9.0 to 11.0 EV on the Level chart surface..
• Because the likelihood of adjustment failure increases as the internal camera temperature rises, when adjustment fails you
should first try turning the camera off for a while and then carrying out the adjustment again.
• When removing / mounting jig lens, please note the dust from entering.
[Required items]
Camera fixing jig If there are no problems with the adjustment environment, a tripod or X-Y
stage can be used.
Lighting Illuminate the chart
FxHS20EXR/X100 Level Chart ZJ01849-100
X-Pro1 Level jig ZJ01935-100
Rotation axis Stand ZJ01858-100
NP-W126 Battery jig ZJ01936-100
FUJINON LENS XF18mm F2 R ---
Laser telemeter Marketing product. Please purchase it in a general merchandising store.
Maker : Makita, Model : SK308PZ
When it's following specification equal to "SK308PZ", the Laser telemeter
container is practicable.
･
Precision :
±
1mm/10m
･
Line Point laser : X direction/Y direction
<Settings for Level Adjustment>
＜Line Point laser movement of Laser telemeter＞
<Settings for Level Chart>
Adjust it in the following procedure at the time of "Level jig
zero degree" so that "Level Chart" becomes level.
(1) Setting Rotation Stand in the horizontal place.
(2) Setting of Level jig in Rotation Stand. Setting of Level jig
at the time of "0 degrees" to become level.
(3) Adjust the positions so that the distance from the level
chart to the camera's lens-face is 500 +-5 mm.
(4) The Chart center comes to the LCD center.
(5) Setting Laser telemeter in the horizontal place.
(6) Irradiate Line Point in Chart from telemeter.
(7) Turn Chart to Line Point.
(8) The chart center confirms a thing in the LCD center.
Lighting
500±10mm
Level Chart
Center
Camera
This gray section is the
“lens-face”.
Y direction
X direction
Level Chart
Level jig
Rotation Stand
Revised:13.April.2012