FujiFilm X-Pro1, Service Manual

Page: 48 / 132

Confidential: FUJIFILM Service Center Use Only
X-Pro1 Service Manual
1-42
(3) I press it with a big part of push Tool in the arrow direction.
*1: I press it until I put it and am assigned to the red bar side of the right wall (1).
*2: It travels push Tool in the upper part of the card lid and presses it until I expose it to (2)
red horizontal line region and am accompanied.
*3: It travels push Tool in the bottom of the card lid and presses it until I expose it to (3)
red horizontal line moiety and am accompanied.
*4: I press it between (4) and (5) in the arrow direction.
*5: I divide the whole red frame moiety into three times and press it.
(Grip press tool Type B: ZJ01924-100)
(4) I commute in the arrow direction with a curve part of push Tool and press it.
*1: I press it until I expose it to (2) red line moiety in the state that let you go of the R LEFT side
grip curve part (1) and am accompanied and press it by coming and going until I expose it to (3)
red line side and am accompanied.
*2: I move to the right side for a thing of push Tool and press it by coming and going until I put it, and
(2) red line part is accompanied.
*3: I repeat the work mentioned above to (4) red line part.
*4: I divide it into three times and press it.
(Grip press tool Type C: ZJ01925-100)
1
2
3
4
5
1
2
3
4
Type B
Type C
Revised:21.Feb.2012