FujiFilm X-Pro1, Service Manual

Page: 81 / 132

Confidential: FUJIFILM Service Center Use Only
X-Pro1 Service Manual
3-21
<Step 1>
In the adjustment item select screen, select [L]: Level Adjustment(Normal temperature).
<Step 2>
[Preparing for Level Adjustment(Normal temperature)]
(1) Prepare the Level chart.
(2) Mount the camera on the Level jig so that it is facing the
level chart.
(3) Adjust the positions so that the distance from the level
chart to the camera's lens-face is 500 +-5 mm.
When you have completed the preparations, press the [Enter]
key to proceed.
<Step 3>
[Level Adjustment(Normal temperature) initialization]
(1) Set the camera and Level chart to designated distance.
When you have completed the preparations, press the [Enter]
key to proceed.
<Step 4>
(1) Set the Level jig in 0 degree.
When you have completed the preparations, press the [Enter]
key to proceed.
Set up the posture of the camera in the angle of 0 degree.
Press the [Enter] key.
Level Adjustment(Normal temperature)
(1) Adjust the position of the camera so that the center of
the Level chart is displayed in the camera LCD.
When preparations (1) is complete,
press the [Enter] key.
A = 500 +-5mm
Level Adjustment(Normal temperature)
(1) Prepare a Level chart (1000mm x 700mm or more)..
(2) Set the camera in the [Level Jig]..
(3) Set the distance between the camera and
the Level chart to 500 +-5mm
When the camera temperature is less than 30 degrees, adjust it.
When preparations (1) - (3) are complete,
press the [Enter] key on the PC.
--> The lens is extended when the [Enter] key is pressed.