FujiFilm X-Pro1, Service Manual

Page: 112 / 132

Confidential: FUJIFILM Service Center Use Only
X-Pro1 Service Manual
4-12
4-6-4. Inspection of Dusts by the Shooting Test
<Step 1>
Mount XF35mmF1.4R lens on the camera.
<Step 2>
Click: Start
↓
Programs
↓
FUJIFILM REPAIR SERVICE
↓
X-Pro1 W Dust Inspection Soft
↓
X-Pro1_W(DustInspection)
<Step 3>
If this procedure stops at the window in the right, press the [Enter]
key to proceed.
<Step 4>
1. Connect the camera to the PC using the “USB cable”.
2. Supply power to the camera.
3. Turn the camera on while holding down the shutter button
and selector up key (  ).
4. Confirm if the LED is on in green.
After completing steps 1 to 4, press the [Enter] key to proceed.


: Revised