4. Adjustment
24
FinePix F601 Zoom (U/E/EG) SERVICE MANUAL
4. Adjustment and Checks
4-1. Adjustments After Replacing Major Components
Make the adjustments noted by ‘O’ below after replacing the MAIN PWB ASSY, DC PWB UNIT, LENS CONST, or MODE
ST UNIT. No adjustments are required after replacing other units.
Replacement component
Adjustment
MAIN PWB ASSY
DC PWB UNIT
LENS CONST
MODE ST UNIT
Battery voltage adjustment
O
O
Mode dial voltage adjustment
O
O
O
CCD defect correction adjustment*
O
O
Camera adjustment
O
O
O
AF adjustment
O
O
O
Flash adjustment
O
O
O
DC jack voltage adjustment
O
O
End Setting
Make all adjustments after replacing the above parts.
* As the CCD defect data floppy disk is supplied only with the LENS CONST (CCD) it cannot be supplied with the
MAIN PWB ASSY which is supplied as a service part.
When the MAIN PWB ASSY is replaced, CCD defect correction adjustment should be conducted in accordance with
the repair and adjustment procedure described below.
(1) Note the serial number on the back of the CCD (IC11) mounted on the LENS CONST on the camera to be repaired.
(2) Find the CCD defect data for the serial number in the CCD defect data file, and copy that data to the floppy disk.
(3) Use this floppy disk for CCD defect correction adjustment.
(note) As with previous models, the flash ROM (IC208) on the MAIN PWB ASSY of the FinePix F601 is a CSP IC and
cannot be easily removed.
4-2. Procedures for Adjustments After Replacing Major Components
LENS CONST
: CCD defect correction adjustment
→
CAM adjustment
→
AF adjustment
→
Flash adjustment
→
End
Setting
MAIN PWB ASSY : Battery adjustment
→
Mode dial adjustment
→
DC jack adjustment
→
CCD defect correction adjustment
→
CAM adjustment
→
AF adjustment
→
Flash adjustment
→
End Setting
DC PWB UNIT
: Battery adjustment
→
Mode dial adjustment
→
DC jack adjustment
→
End Setting
MODE ST UNIT : Mode dial adjustment
→
CAM adjustment
→
AF adjustment
→
Flash adjustment
→
End Setting
(note) Use AF adjustment
→
Flash adjustment for CAM adjustment without replacement components.
4-3. Measuring Instruments Used
Measuring instrument
Remarks
Stabilized power supply
For adjustment
Pattern box
PTB450 or equivalent
Waveform monitor
For function checks
Vector scope
For function checks
Digital voltmeter
For adjustment
Personal computer
For various adjustments and operational checks (PC-AT compatible, Windows 98).
Luminance meter
LS-110 (Minolta) or equivalent
Color thermometer
Color Meter IIIF (Minolta) or equivalent
TV monitor
NTSC TV monitor, minimum resolution 600 lines (for function checks).
Flash meter
For function checks
4-4. Jigs Used
Part name/Model name
Part No.
Remarks
Filter (LB140)
ZJ00006-100
CAM adjustment (common with DS-7/20/30)
AF chart
ZJ00477-100
AF adjustment (common with FinePix6800Z)
Conversion lens (f=600mm)
ZJ00007-100
AF adjustment (common with 8mm VTR/FinePix500)
Lens holder
ZJ00008-100
AF adjustment (common with 8mm VTR/FinePix500)
Stand
ZJ00009-100
AF adjustment (common with 8mm VTR/FinePix500)
Base plate
ZJ00010-100
AF adjustment (common with 8mm VTR/FinePix500)
Gray chart (reflective type)
ZJ00254-100
Flash adjustment (common with FinePix700)
CCD defect data *
ZJ00535-100
CCD defect data file
USB cable
FZ04404-100
Computer adjustment (unique to FinePix F601)
Power cable jig
ZJ00213-100
General adjustment (common with DS-7/FinePix6800Z)
NP60 battery jig
ZJ00496-100
For battery/mode dial voltage adjustment (common with FinePix50i).
FinePix F601 adjustment software*
ZJ00534-101
Dedicated software for general camera adjustment.
AC adapter (AC-5VH)
––––––-–––
General adjustment
DSC jig driver*
ZJ00475-100
DSC jig driver setup
High-precision, fine-resolution chart
ZJ00398-100
For resolution checks (common with FinePixS1Pro/FinePix4700Z).
FinePix F601 firmware (Ver2.11)*
ZJ00541-100
Firmware
* Download Jig of the bold-faced type from the server.
Revised:01.Apr.2002
