13
2. Disassembly
FinePix F601 Zoom (U/E/EG) SERVICE MANUAL
2-6.Removing MODE ST UNIT.
<Step 1>
<Step 1>
Remove in the order indicated by circled numbers.
2-7.Removing LENS CONST .
Remove in the order indicated by circled numbers.
1
2
3
7
4
UL tape
(1) Remove the lock of connector (CN11), and
remove FPC of MODE ST UNIT(BF03674-100).
(2) Remove pop up switch (SW11).
(3) Remove ST SHEET(BB13063-100).
(4) Remove the hook of LENS CONST (two places).
5
(5) Do discharge of the flash.
(6) Remove the lock of connector (CN801), and
remove the connector of MODE ST UNIT.
(7) Remove MODE ST UNIT.
6
[ Notes of assembly of MODE ST UNIT. ]
1. Do the work of decomposition and assembly so that strong power should not hang in connector (CN11)
which has been inserted in LENS CONST. When work that strong power hangs is done, the case where the
solder of connector (CN11) and HONEYCOM CCD peels off is the worst case.
2. Make the straight line part of FPC of MODE ST UNIT a standard, and attach the UL tape on ST SHEET.
(1) Remove connector (CN102/CN103), and
remove FPC of LENS CONST(BU01983-100).
(2) Remove LENS CONST in the direction of the arrow.
1
1
2
[ Notes of assembly of LENS CONST. ]
1. Insert the hook of "2-6.(4)" in two places surely.
2. Lock connector (CN102 and CN103) surely.
Moreover, prevent "Diagonal insertion and insertion
of the half" of FPC from being.
