26
Step 7 cont.: Install inlet and outlet pipes using primer and cement. For larger systems with 5” inlet
and outlets, you may use 5”: 4” eccentric reducer adapters included with system. Install with thin
edge down. Apply primer and cement to 4” PVC pipe sections to inlet and outlet.
Step 7 cont.: Using supplied adaptors and fittings, attach air pipe fitting to tank and connect to ¾”
or 1” conduit in prepared trench (min. 6” deep) to location of air blower. Please note: ¾” or 1”
flexible irrigation line, 100 PSI Max, (or equivalent) may also be used for the air line. PLEASE REFER
TO TABLE ON PAGE 13 FOR PROPER AIRLINE SIZING.
Step 7 cont.: In case of install a vent, please refer instructions page 21.
Step 8: Locating and Installing Blower/Control Panel.
