Equipment Supplied to Contractor
Signalmaster Float
Switch
(Affix to pumpback line in center
chamber with 3-1/2” tether)
FujiMAC UL Approved
Air Blower(s)
(Blower size and
quantity according to model. Blower
barb hole for smaller models
Alarm / Control Panel
(NEMA 4X Rated)
Thank you for choosing to install a Fuji Clean treatment system. We care that the system is
installed properly and thoughtfully. Fuji Clean USA or your qualified distributor will train and
certify you for proper installation. Please be aware that not every item below comes with every
model. Component needs vary according to model. Please call Fuji Clean USA with questions.
NSF Dataplates (2)
(Smaller models only)
Installation Manual, User’s Manual, Warranty Card
Fuji Clean Processor Tank
Air Vent Hole and Plug
(Tighten clockwise. Plugs the vent hole if
venting through building. Note: some
models have two vent holes.)
Risers & Covers
(height may
vary – check with local distributor)
Blower adaptor Fitting
with Barb
(For larger models.
Not provided/necessary with “M”
Alarm Panel)
1/8” (ID) Vinyl Micro-Tubing for Air
Pressure Sensing Alarm.
(Not provided/necessary
with “M” Alarm Panel)
Eccentric Inlet/Outlet 5x4 Bushing (2)
(Larger models
only)
2
Airline to Tank Adapter
(For CE14 and CEN10.
Unglued. Glue during installation.)
