
Printer Connection and Software Installation
37
• WPS-PIN
The PIN code of WPS-PIN can only be configured from the operator panel.
NOTE:
•
WPS-PIN is available only when the wireless LAN access point (Registrar) or router supports WPS-PIN.
•
For the WPS operation on the wireless LAN access point (Registrar) or router, refer to the manual supplied with the product.
•
The
(
Wi-Fi
) LED lights up or blinks to indicate the printer's wireless connection status. For more information, see "Status
of Wi-Fi LED" on page 19.
If a problem occurs or error messages are displayed on the LCD panel, see "Wireless Problems" on page 155.
1
Press the
(
Menu
) button.
2
Select
Admin Menu
, and then press the
button.
3
Select
Network
, and then press the
button.
4
Select
WPS Setup
, and then press the
button.
5
Select
PIN Code
, and then press the
button.
6
Write down the displayed 8-digit PIN code, or select
Print PIN Code
and press the
button to print the
PIN code.
7
Select
Start Configuration
, and then press the
button.
8
Select the wireless LAN access point from the list, and then press the
button.
9
Confirm that
WiFi-WPS linking Timeout:[XXX]
appears, and enter the PIN code displayed on step
6
into
the wireless LAN access point within two minutes.
NOTE:
•
For details about the WPS operation on the wireless LAN access point, refer to the manual supplied with the wireless
LAN access point.
When WPS is successful, the
(
Wi-Fi
) LED lights up. The wireless connection is established and setup for
wireless LAN is complete.
• Auto SSID Setup
1
Press the
(
Menu
) button.
2
Select
Admin Menu
, and then press the
button.
3
Select
Network
, and then press the
button.
4
Select
Wi-Fi Setup
, and then press the
button.
The printer automatically searches the access points on wireless network.
5
Select the desired access point, and then press the
button.
If the desired access point does not appear, see "Manual SSID Setup" on page 38.
NOTE:
•
Some hidden SSID may not be displayed. If the SSID is not detected, turn on SSID broadcast from the access point.