Fuji Xerox DocuPrint CP205 w User Manual Download Page 223

Page: 223 / 272

Troubleshooting

222

Noise

NOTE:

•

In this section, the procedures use the Printer Setting Utility.

Problem

Action

The printer makes a strange
noise.

Locate the cause of the problem by removing the toner cartridges.

Remove the toner cartridges.

Launch the Printer Setting Utility, and click

Machine Check

on the

Diagnosis

tab.

Select

Main Motor Operation Check

from the drop-down list box,

and click the

Start

button.

Click the

Play of Sound

button to check the motor sound.

If the noise generated from the printer matches with the noise from
the

Play of Sound

button, contact the Fuji Xerox local representative

office or an authorised dealer.
Perform Dispense Motor Check.

Ensure that the toner cartridges are removed.

Launch the Printer Setting Utility, and click

Machine Check

on the

Diagnosis

tab.

Select

Dispense Motor Check(Yellow)

Dispense Motor

Check(Magenta)

Dispense Motor Check(Cyan)

, or

Dispense

Motor Check(Black)

from the drop-down list box, and click the

Start

button.

Click the

Play of Sound

button to check the motor sound.

Repeat steps 3 and 4 to perform Dispense Motor Check for the rest
of the toner cartridges.

NOTE:

•

You can perform Dispense Motor Check for CMYK in any order
you desire.

•

Do not check the operation of the dispense motor repeatedly.

If the noise generated from the printer matches with the noise from
the

Play of Sound

button, contact the Fuji Xerox local representative

office or an authorised dealer.
Reinstall the toner cartridges and perform Dispense Motor Check.
If the noise generated from the printer matches with the noise from
the

Play of Sound

button, contact the Fuji Xerox local representative

office or an authorised dealer.

Summary of Contents for DocuPrint CP205 w

















































































































































































































































































Search results

Summary of Contents for DocuPrint CP205 w

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint CP205 w, User Manual

Search results

Summary of Contents for DocuPrint CP205 w

Reviews:

Brands by name

Popular brands