manualshive.com logo in svg

Fuji Xerox DocuPrint CM115 w, User Manual

The Fuji Xerox DocuPrint CM115w is a versatile all-in-one printer that combines printing, scanning, and copying capabilities. With its user-friendly interface, getting started is a breeze. To fully unleash the potential of this device, make sure to download the free user manual from manualshive.com. It's your ultimate guide to optimizing your printing experience.

Share
Download
background image

46

Printer Connection and Software Installation

Setting the IP Address (for IPv4 Mode)

NOTE: 

•

To set an IP address for IPv6 in Dual Stack mode, use the CentreWare Internet Services. For more information, refer to the 
online Help on the CentreWare Internet Services. To display the CentreWare Internet Services in an IPv6 network, use a link 
local address. The printer's link local address is listed in the System Settings page. For details, see "Printing a System 
Settings Page" on page 115.

Printer's TCP/IP and IP Addresses

If your computer is on a large network, contact your network administrator for the appropriate TCP/IP addresses and 
additional system settings information. 
If you are creating your own small local area network or connecting the printer directly to your computer using 
network, follow the procedure for automatically setting the printer's IP address. 
Computers and printers primarily use TCP/IP protocols to communicate over network. With TCP/IP protocols, each 
printer and computer must have a unique IP address. It is important that the addresses are similar, but not the same; 
only the last digit needs to be different. For example, your printer can have the address 192.0.2.1 while your 
computer has the address 192.0.2.2. Another device can have the address 192.0.2.3.
Many networks have a Dynamic Host Configuration Protocol (DHCP) server. A DHCP server automatically 
programs an IP address into every computer and printer on the network that is configured to use DHCP. A DHCP 
server is built into most cable and Digital Subscriber Line (DSL) routers. If you use a cable or DSL router, see your 
router's documentation for information on IP addressing.

Dynamic Methods of Setting the Printer's IP Address

The DHCP and AutoIP protocols are available for dynamically setting the printer's IP address. They are enabled by 
default in your printer.
You can turn on/off both protocols using the operator panel or the CentreWare Internet Services.

NOTE: 

•

You can print a report that includes the printer's IP address. For more information, refer to "Printing a System Settings Page" 
on page 115.

Using the Operator Panel

1

Press the 

System

 button.

2

Select 

Admin Menu

, and then press the 

 button.

3

Select 

Network

, and then press the 

 button.

4

Select 

TCP/IP

, and then press the 

 button.

5

Select 

IPv4 Wireless

, and then press the 

 button.

6

Select 

Get IP Address

, and then press the 

 button.

7

Select 

DHCP/AutoIP

, and then press the 

 button.

8

Turn off and turn on the printer.

Summary of Contents for DocuPrint CM115 w












































































































































































































































































Reviews:

No comments

Related manuals for DocuPrint CM115 w

DataCard CR500 Quick Install Manual preview
CR500
Brand: DataCard Pages: 17
DataCard CR500 User Reference Manual preview
CR500
Brand: DataCard Pages: 24
Canon PIXMA MX522 Setup Manual preview
PIXMA MX522
Brand: Canon Pages: 30
TP-Link TL-PS110P Quick Installation Manual preview
TL-PS110P
Brand: TP-Link Pages: 16
Intellisystem ThermalTronix TT-1260S-UTCM User Manual preview
ThermalTronix TT-1260S-UTCM
Brand: Intellisystem Pages: 18
Pantum L2710 Series User Manual preview
L2710 Series
Brand: Pantum Pages: 164
Oki OKIDATA OL400e User Manual preview
OKIDATA OL400e
Brand: Oki Pages: 88
Oki PAGE 14ex User Manual preview
PAGE 14ex
Brand: Oki Pages: 40
Lexmark XM3250 User Manual preview
XM3250
Brand: Lexmark Pages: 289
Xerox 4250 - WorkCentre - Copier Specifications preview
4250 - WorkCentre - Copier
Brand: Xerox Pages: 4
Konica Minolta bizhub PRO C65hc Additional Information preview
bizhub PRO C65hc
Brand: Konica Minolta Pages: 24
Xerox 8254E User Manual preview
8254E
Brand: Xerox Pages: 244
Kyocera ECOSYS P8060cdn Quick Manual preview
ECOSYS P8060cdn
Brand: Kyocera Pages: 20
Riso HC5500T User Manual preview
HC5500T
Brand: Riso Pages: 66
OmniPrint OM9300F Technical Manual preview
OM9300F
Brand: OmniPrint Pages: 23
Tally T2280 SprintPro Maintenance Manual preview
T2280 SprintPro
Brand: Tally Pages: 43
Lexmark X734DE Service Manual preview
X734DE
Brand: Lexmark Pages: 626
Canon LK-62 User Manual preview
LK-62
Brand: Canon Pages: 152

Brands by name

Popular brands

Load more brands