Fuji Xerox ApeosPort C5570 Reference Manual Download Page 53

Page: 53 / 290

3.5 Loading Paper

Load the paper with the print side facing up and its leading edge aligned with the left side of the paper tray.

Important



Do not load paper above the maximum fill line (the position “MAX”). It may cause paper jams.

Note



When using punched paper, load the punched paper as shown in the illustration.

Push the tray in gently.

Important



When inserting the paper tray, push it slowly. Forcibly pushing the tray in may cause a malfunction.

Specify the type of the paper loaded when you have changed the paper type.

Refer



For more information about paper type settings, refer to "Changing the Paper Settings" (P.58).

Loading Paper in Tray 5 (Bypass)

Open Tray 5 (Bypass).

Summary of Contents for ApeosPort C5570



































































































































































































































































































Search results

Summary of Contents for ApeosPort C5570

Reviews:

Related manuals for ApeosPort C5570

Brands by name

Popular brands

Fuji Xerox ApeosPort C5570, Reference Manual

Search results

Summary of Contents for ApeosPort C5570

Reviews:

Related manuals for ApeosPort C5570

Brands by name

Popular brands