Fuji Xerox ApeosPort C5570 Reference Manual Download Page 281

Page: 281 / 290

281

11.5 Emulation

Automatic line feed

[0]: CR
[1] (Default): CR/LF

Note



Sets an auto line-feed operation when the right margin
position is exceeded.



“CR” performs a carriage return only. “CR/LF” performs a
carriage return, and then a line feed.

Print instruction

[0] (Default): CR
[1]: All

Note



[CR] sets the printing instruction command to CR only, [All]
sets the printing instruction command as CR, LF, VT, FF, US,
ESC a, and ESC b.

CR Functions

[0] (Default): Carriage return
[1]: New line

Note



This setting is not applied by extension commands sent
from users.



Affects the print results of the 8-bit dot image printing
command.

Graphic dot quantity

[0] (Default): Native
[1]: Copy

Data size

[0]: 7 bit
[1] (Default): 8 bit

HP-GL Mode

150

[0] (Default): HP-GL
[1]: HP-GL/2

Note



Affects the IW, OW, and UC commands.



Configure “HP-GL/2” to print HP-GL/2 data without a BP
command.

Hard Clip

151

[0]: Standard
[2] (Default): Paper

Eject Command

152
(SP)

[0]: OFF
[1]: ON

Note



Configure the command to indicate the end of drawing.



If the command specified here is received, drawing is ended,
and the paper is output.



The default setting for SP0 is “ON” and “OFF” for other
commands.



When multiple commands are specified, drawing is ended,
and the paper is output whenever any one of the commands
is received.

153

(SP0)

154

(NR)

155

(FR)

156

(PG)

157

(AF)

158

(AH)

Setting

Item No.

Setting value

ESC

PCL

Summary of Contents for ApeosPort C5570



































































































































































































































































































Search results

Summary of Contents for ApeosPort C5570

Reviews:

Related manuals for ApeosPort C5570

Brands by name

Popular brands

Fuji Xerox ApeosPort C5570, Reference Manual

Search results

Summary of Contents for ApeosPort C5570

Reviews:

Related manuals for ApeosPort C5570

Brands by name

Popular brands