264
11 Appendix
Memory registration/deletion
Register the content of the current settings to [Custom Settings] or delete registered memory.
Start-up memory
Configure the initial values at start-up.
Supported Fonts
Usable fonts can be checked by browsing to [Device] > [Information & Reports] > [Print Reports] > [Printer Reports],
and tapping [Font List] or [PCL Font List].
User defined characters (external characters) can be used by ESC/P.
User defined characters are registered as a bitmap font and are retained even if the power is turned off. They
cannot be shared between print languages.
Print Features
N Up
2 Up can be used.
Forms
You can register fixed forms, combined registered forms with print data, and print.
Note
A new form is not registered in the following cases: when an attempted form registration would exceed the upper limit
for the number of registered forms or when the memory capacity for forms is full.
You can check form registration by browsing to [Device] > [Information & Reports] > [Print Reports] > [Printer Reports] >
[ART IV, ESC/P User Defined List].
Barcode (ESC/P)
The following barcode standards are supported.
JAN codes
CODE39
CODABAR
Industrial 2 of 5
Matrix 2 of 5
Interleaved 2 of 5
CODE128
Customer barcodes
QR codes
OCR-B
You can check the command specification method by browsing to [Device] > [Information & Reports] > [Print
Reports] > [Printer Reports] > [PCL Font List].
Emulation Mode
N Up
Forms
Barcode
ESC/P
Yes
64
Yes
PCL
-
-
Yes
HP-GL, HP-GL/2
-
-
-
