Fuji Electric ZSS-7, Instruction Manual

Page: 94 / 116

INZ-TN7ZSS-E
- 87 -
6.9 Fine adjustment of analog output value
This section explains the fine adjustment method of analog output. Since a slight discrepancy of analog out-
put value may be caused, perform adjustment according to the following method.
Point the cursor to "Password" in the bottom left
of the “Menu” screen by the key or the
key.
Press the key to change the display to
“ 0 0000”.
Enter “02404” to the Password. Select the digits
by the key, and press the key or the
key to move the cursor to “Password”.
Press the key to display the “Factory
Menu” screen.
Point the cursor to “Analog Output Tuning” by
the key or the key, and press the
key.
2006-04-01
12:00:00
Menu
Zero Calibration
Alarm Log
Display/Output
Pasword
Parameter Setting
Input Signal
Span Calibration
Alarm Setting AO Select
Output Hold Analyzer Information
ENT
2006-04-01
12:00:00
Menu
Zero Calibration
Alarm Log
Display/Output
Pasword
Parameter Setting
Input Signal
Span Calibration
Alarm Setting AO Select
Output Hold Analyzer Information
2006-04-01
12:00:00
FACTORY MENU
Analog Output Tuning
Analog Input Tuning
ZeroSpan Coeffiecient
Parameter Setting
ENT
ENT