Fuji Electric ZSS-7, Instruction Manual

Page: 89 / 116

- 82 -
INZ-TN7ZSS-E
6.7.2 Setting of analog input (fixed value) (in case of H
2
O)
Sets the fixed value to perform the calibration when the measured gas condition do not change, or the sensor
inputs to calibrate are not provided, or the number of calibration input terminals is insufficient. When the
actual value differs greatly from the setting value, analog input may not be measured correctly.
Select “H
2
O” by the key or the key.
Press the key to move the cursor to
“Channel” setting.
( )
Select “Fixed” by the key or the
key, and press the key.
( )
Enter the fixed value.
Change the numeric value by the key or
the key, and move the digits by the
key. Press the key to validate the set input
value.
( )
Analog Input
GasPress.(kPa) Fixed
Fixed 4mA 20mA
00.00 00.00 10.00
Gas Temp.(
é
) 0027 0000 0500
᳉Წ
(vol%)
20.00 00.00 21.00
᳂Წ᳉
(vol%)
050.0 000.0 100.0
Gas Flow(m/s) 02.00 00.00 20.00
Air Purge(kPa) No 000.0 100.0 005.0
Alarm
4mA 20mA
Under
2006-04-01
12:00:00
Ჽ᳂Ძ
Fixed
Fixed
Ჽ᳂Წ
Analog Input
GasPress.(kPa) Fixed
Fixed 4mA 20mA
00.00 00.00 10.00
Gas Temp.(
é
) 0027 0000 0500
᳉Წ
(vol%)
20.00 00.00 21.00
᳂Წ᳉
(vol%)
050.0 000.0 100.0
Gas Flow(m/s) 02.00 00.00 20.00
Air Purge(kPa)
No
000.0 100.0 005.0
Alarm
4mA 20mA
Under
2006-04-01
12:00:00
Ჽ᳂Ძ
Fixed
Fixed
Ჽ᳂Წ
ENT
ENT
Analog Input
GasPress.(kPa) Fixed
Fixed 4mA 20mA
00.00 00.00 10.00
Gas Temp.(
é
) 0027 0 000 1000
᳉Წ
(vol%)
20.00 00.00 21.00
᳂Წ᳉
(vol%)
050.0 000.0 100.0
Gas Flow(m/s) 02.00 00.00 20.00
Air Purge(kPa) No 000.0 100.0 005.0
Alarm
4mA 20mA
Under
2006-04-01
12:00:00
Ჽ᳂Ძ
Fixed
Fixed
Fixed
ENT
ENT