Fuji Electric ZSS-7, Instruction Manual

Page: 31 / 116

- 24 -
INZ-TN7ZSS-E
4.9 Assembly of receiver unit and transmitter unit
(1) Prepare “Receiver box or transmitter box” and “Hexagonal socket bolt” as shown in the following fig-
ure (Fig. 4
－
10). (Check that the O-ring is mounted on near the lens (refer to Figure below) of the re-
ceiver unit or the transmitter unit)
(2) Mount “Receiver box or transmitter box” on “Angle adjustment unit” so that the cable receptor is posi-
tioned down. (Be careful not to touch the lenses of the transmitter box and the receiver box during in-
stallation.)
(3) Fix it with the 6 “hexagonal socket bolts”.
Fig. 4
－
10
Angle adjustment unit
O-ring Hexagonal socket bolt
Cable receptor
Receiver box or
transmitter box
Lenses