manualshive.com logo in svg

Frymaster Enodis BIELA14 LOV Series, Operator'S Manual, Page: 69 / 88

Share
Download
Frymaster Enodis BIELA14 LOV Series Operator'S Manual Download Page 69

5-6 

Computer displays 

filter service required 

- see manual

 alternating with 

yes no

 (see 

Figure 28). 
 
5.   Press 

9

 (

1

 

yes

) (see Figure 29) and check to see if 

the pad needs replaced and filter pan needs cleaning.  
The fryer resumes to normal cooking mode for 30 
minutes (see Figure 30).  

 
 
 
 

           

 

Figure 28                                  Figure 29 
 

 

Figure 30 

 

After 30 minutes the computer displays 

filter 

problem fixed

 alternating with 

yes no

 with a 

flashing filter light (see Figure 31). 

 

6.   Press 

9

 (

1

 

yes

) if the filter problem is fixed and the 

pan is clean and ready for use.  The fryer returns to 
normal cooking mode (see Figure 32).  Pressing 

8

 

(2 

NO

), 

restarts a 30 minutes timer ending with the 

filter problem fixed

 alternating with 

yes no

 prompt repeating, until 

yes

 is chosen.  

 

        

 

Figure 31                                 Figure 32 
 

 

Figure 32 

 

5.4.3  Change Filter Pad Prompt 

 
1.   With 

CHANGE FILTER PAD

 alternating with 

yes no

 displayed (see Figure 33), press the 

9

 (

1

 

yes

) after the filter pad is changed and the pan has 

been pulled forward from the cabinet for at least two 
minutes.  

DO NOT PRESS

 YES before the two 

minutes have elapsed.  (see Figure 34).   

 
The computer returns to the regular cook mode (see 
Figure 35). 
 
The computer restarts 

change filter pad

 

sequence if the pad was not changed. 

 

Pressing 

8

 

(2 

NO

), 

restarts a 15 minutes timer ending 

with the 

CHANGE FILTER PAD

 alternating with 

yes no

 prompt with an alarm repeating, until 

yes

 is 

chosen.  

 

    

 

Figure 33                                   Figure 34 

 

 

Figure 35 

 

Summary of Contents for Enodis BIELA14 LOV Series

























































































Reviews:

No comments