manualshive.com logo in svg

Frymaster Enodis BIELA14 LOV Series, Operator'S Manual, Page: 58 / 88

Share
Download
Frymaster Enodis BIELA14 LOV Series Operator'S Manual Download Page 58

4-42

 

9.  Press the 

 

(2)

 

button again (see Figure 328) to exit. 

 
The computer displays

 

OFF

 (see Figure 329). 

 

 

 

       

 

Figure 328     Figure 329 

Note:

  The AIF filtration mode uses two measures before prompting to filter.  One checks for cook 

cycles and the other checks for time.  

 

4.13.5  FILTER AFTER 

 

The 

FLTR AFTR 

option is used to set the amount of cooking cycles which passes before the 

filtration prompt is displayed. 

 

1.  Perform steps 1-3 on page 4-37 

 

 

Scroll to 

FLTR AFTR

 (see Figure 330). 

 

2.  With 

FLTR aftr

 displayed, press the

   

(

1

 

yes

) 

button (see Figure 331). 

 

          

 

Figure 330                              Figure 331 
 

 

The computer displays 

fltr aftr 

on the left and 

0

 

on the right (see Figure 332).   

 

 

Figure 332 

 

3.  Use the

 

number keys (see Figure 333) from 0 to 9 to 

enter the number of cook cycles before prompting to 
filter  (ex. after every 12 cycles enter as 12). 

 

Figure 333 

 

The computer displays 

fltr AFTR 

on the left and 

12

 on the right (see Figure 334).   

 

 

Figure 334 

 

4.  With the desired selection displayed, press the

 

INFO

u

 

button (see Figure 335). 

 

 

Figure 335

 

5.  Press the 

 

(2)

 

button (see Figure 336) to exit. 

 
The computer displays

 

OFF

 (see Figure 337). 

 

 

        

 

Figure 336      Figure 337 

 

4.13.6  FILTER TIME

 

 

The 

FLTR time 

option is used to set the amount of time which passes before the filtration prompt 

is displayed.  This option is useful in lower volume stores, where filtration is desired more often than 
the amount the cook cycles would generate. 

 

1.  Perform steps 1-3 on page 4-37. 

 

 

Scroll to 

FLTR TIME

 (see Figure 338). 

 

2.  With 

FLTR TIME

 displayed, press the

   

(

1

 

yes

) 

button (see Figure 339). 

        

 

Figure 338                                  Figure 339 

 

Summary of Contents for Enodis BIELA14 LOV Series

























































































Reviews:

No comments