manualshive.com logo in svg

Frymaster Enodis BIELA14 LOV Series, Operator'S Manual, Page: 23 / 88

Share
Download
Frymaster Enodis BIELA14 LOV Series Operator'S Manual Download Page 23

4-7

 

4.7  M2007 Button Description and Functions 

 

4.7.1  Navigation Buttons 

 

The menu on the M2007 uses 

34

and 

tu

 buttons to 

navigate the various menus and submenus (see Figure 1).  
 
The displays on some menu items scroll text too long to fit 
on a single screen.  Some illustrations here show 
additional characters to display scrolling message (see 
example in Figure 2). 
 

 

Figure 1 

 

 

Figure 2 

 

In other illustrations the displays (see Figure 3) are 
cropped for clarity (see Figure 4). 
 
When programming, the left screen shows a menu or 
submenu item.  The right screen is for data entry.  Data is 
entered with alpha-numeric characters, scrolling through 
lists or by toggling between choices. 
 

 

Figure 3 

 

       Left Display              Right Display 

Figure 4 

 

During programming if a button is not pushed within one minute, the computer returns to operation 
mode. 

 

4.7.2  Filter, Temperature and Info Buttons 

 
The 

< FLTR

 

and

 

FLTR >

 buttons (see Figure 1) are used to filter the left and right vats of a split 

vat fryer on demand, while the right 

FLTR >

 button is used to filter a full vat on demand. The 

FLTR

 buttons, if pressed once will display the amount of cook cycles remaining until a filtration 

prompt. When the 

FLTR

 button is pressed twice, the date and time of the last filter will be 

displayed.    The 

TEMP

 button, if pressed once while the fryer is on, displays current vat 

temperature on both sides. If the fryer is off, the display shows the current versions of software.  If 
the 

TEMP

 button is pressed twice while the fryer is on, it shows the setpoint temperatures of the 

vats.  The 

INFO

 button (see Figure 1), if pressed once, shows the recovery time for each vat from 

the last test.  Recovery displays the time required for the fryer to raise the temperature of the oil 50°F 
(28°C) between 250°F (121°C) and 300°F (149°C).  If the 

INFO

 button is pressed and held for 

three seconds it shows information such as usage, filter statistics and last cook cycles (see page 4-51 
for more details on the 

INFO

 button). 

 

4.7.3  Cook Cycle and Selection Buttons 

 

The 

 

 

buttons are dual-function buttons shared with 

the number 

1

 and 

2

 buttons. They are located directly 

below the LED displays (see Figure 5).  Use these buttons 

to select or cancel functions.  The 

 

button is used to back 

out of and quit submenus. 
 

 

Figure 5 

Summary of Contents for Enodis BIELA14 LOV Series

























































































Reviews:

No comments