4-9
4.9
Fryer Setup Mode Programming
The computer, upon initial power up, when changing out a computer or accessed from Level 1,
enters setup mode. These parameters need to be set to allow the auto filtration, logs and other
functions to operate correctly. The setup sets the time, date, date format, language, fryer type, vat
type, oil system type and the temperature scale from F° to C°. These settings should only be changed
by a technician.
On initial power up the computer displays
OFF
(see Figure 6).
Figure 6
1. Press either soft power button (see Figure 7) or
with the computer
OFF
(see Figure 6), enter
Level 1 programming mode by pressing the
TEMP
and
INFO
buttons (see Figure 8)
simultaneously until
LEVEL 1
is displayed (see
Figure 9).
Figure 7
Figure 8 Figure 9
2. The computer displays
FRYER Setup
if
initially powering up the computer and/or
ENTER CODE
if programming through
Level 1(see Figure 10).
Figure 10
3. Enter
1234
(see Figure 11).
If initially powering up the computer skip to step 6,
otherwise if programming through Level 1 continue
to the next step.
1
2
3
4
(
1234
)
Figure 11
The computer displays
level 1 program
for three seconds
and sounds an alert (see Figure
12).
Figure 12
The computer then displays
Product
selection
(see Figure 13).
Figure 13
4. Press the
u
button (see Figure 14) to scroll to
FRYER SETUP
(see Figure 15).
Figure 14 Figure 15