manualshive.com logo in svg

Frymaster Enodis BIELA14 LOV Series, Operator'S Manual, Page: 66 / 88

Share
Download
Frymaster Enodis BIELA14 LOV Series Operator'S Manual Download Page 66

5-3 

Press 

9

 (1)

 for 

YES 

to start filtration and 

8

 (2)

 for 

NO

 (see Figure 5).

 

 

Figure 5

 

 
Note:

 

If a timer button is activated during this filter prompt it will be as if No is chosen. (See 
below.) 

 

 

If 

YES

 is chosen, 

SKIM VAT 

is displayed for ten 

seconds changing to

  cnfm fltr 

(see Figure 6).  

Skim the crumbs from the oil with a front to back 
motion, removing as many crumbs as possible from 
each vat.  This is critical to optimizing usable oil life 
and quality in the oil. 
 

 

 

Figure 6

 

Note:

        If 

NO

 

is chosen in response to either 

FLTR now 

or

  Cnfm FLTR

, filtering is 

cancelled and the fryer resumes normal operation.  The 

FLTR now 

prompt is 

displayed once the FLTR AFTR count is satisfied.  This sequence repeats until yes

 

is 

chosen.   

 
If the filter pan is not fully engaged, the computer displays 

CHK PAN

.  Once the filter pan is 

pushed fully into place, press the 

9

 

(1)

 button to continue. 

 
When 

9

 (1)

 

YES

 is chosen, the fryer displays 

filtering 

(see Figure 7) and the auto filtration 

cycle is started.

 

 

 

 

Figure 7

 

 

Note: 

If a vat is filtering another vat will not filter until the first vat is finished filtering.  This 
prevents multiple vats from filtering at the same time or multiple vats from being 
inoperable.  

 
Once filtering is complete the computer display 
changes to 

low temp

 until the fryer reaches 

setpoint

 

(see Figure 8). 

 

Figure 8

 

Once fryer reaches setpoint and the computer display 
changes to the product or dashed lines, the fryer is 
ready for use (see Figure 9). 
 
The complete filtering process takes roughly three 
minutes. 

 

Figure 9

 

Summary of Contents for Enodis BIELA14 LOV Series

























































































Reviews:

No comments