Frymaster Enodis BIELA14 LOV Series Operator'S Manual Download Page 54

Page: 54 / 88

4-38

4.13.1 PRODUCT COMP MODE

The product comp mode allows the product compensation (sensitivity) to be changed. Some menu
items may need an adjustment, depending on their cooking characteristics.

Use caution when

changing the product compensation, as it could have an adverse affect on the products cooking
cycles.

By default the product compensation is set to four.

1. Perform steps 1-3 on page 4-37.

Computer displays

Prod Comp

(see Figure 283).

2. With

prod comp

displayed press the

(

yes

)

button (see Figure 284).

Figure 283 Figure 284

Computer displays

select product

(see Figure

285).

Figure 285

3. Use the

and

to scroll through the product list (see

Figure 286).

Figure 286

The computer displays the product selected (see Figure
287).
4. With a product selected (see Figure 287), press the

(

yes

) button to select a product (see Figure 288).

Figure 287 Figure 288

The computer displays

modify

alternating with

yes

(see Figure 289).

5. Press the

(

yes

) button to continue or the

(2)

button to return to

PRODUCT SELECTION

(see

Figure 290).

Figure 289 Figure 290

Computer displays

LOAD COMP

on left side with

some numeral on the right (see Figure 291). This is the
sensitivity setting recommended for this product.

It is

highly recommended not to adjust this setting,
as it could have an adverse affect on the
product.

Figure 291

6. If changing this setting, enter a number between 0-9.

7. Press the

(

INFO

) button to accept selection (see

Figure 292).

Figure 292

8. Press the

(2)

button (see Figure 293) three times to

exit.

The computer displays

OFF

(see Figure 294).

Figure 293 Figure 294

Summary of Contents for Enodis BIELA14 LOV Series

























































































Search results

Summary of Contents for Enodis BIELA14 LOV Series

Reviews:

Frymaster Enodis BIELA14 LOV Series, Operator'S Manual, Page: 54 / 88

Search results

Summary of Contents for Enodis BIELA14 LOV Series

Reviews: