Frymaster Enodis BIELA14 LOV Series Operator'S Manual Download Page 59

Page: 59 / 88

4-43

The computer displays

fltr time

on the left and

:00

on the right (see Figure 340).

Figure 340

3. Use the

number keys from 0 to 9 to enter the amount

of time between filter prompts (ex. after every 2:00
hours enter as 200) (see Figure 341).

Figure 341

The computer displays

fltr time

on the left and

2:00

on the right (see Figure 342).

Figure 342

4. With the desired selection displayed, press the

INFO

button (see Figure 343).

Figure 343 Figure 344

5. Press the

(2)

button (see Figure 344) to exit.

The computer displays

OFF

(see Figure 345).

Figure 345

4.14 INFO Mode

The

INFO

button is used to gather information as well as navigate menus. The

INFO

button, if

pressed once, shows the recovery time for each vat from the last test. Recovery displays the time
required for the fryer to raise the temperature of the oil 50°F (28°C) between 250°F (121°C) and
300°F (149°C).

Press the

INFO

button for three seconds and it will show usage, filter statistics and last cook cycles.

To enter

INFO

mode:

1. Press the

INFO

button for three seconds (see Figure

346).

Figure 346

The computer displays

info mode

for three seconds

changing to

filter stats

(see Figure 347).

2. Press the

and

buttons to scroll between:

Full Vat Configuration

filter stats

See pg. 4-44

review usage

See pg. 4-45

last load

See pg. 4-57

split Vat Configuration

filter stats

See pg. 4-44

review usage

See pg. 4-45

last load L

See pg. 4-47

last load R

See pg. 4-47

Figure 347

Summary of Contents for Enodis BIELA14 LOV Series

























































































Search results

Summary of Contents for Enodis BIELA14 LOV Series

Reviews:

Frymaster Enodis BIELA14 LOV Series, Operator'S Manual, Page: 59 / 88

Search results

Summary of Contents for Enodis BIELA14 LOV Series

Reviews: