Fronius Robacta Reamer Alu 3000upm, Operating Instructions Manual

Page: 72 / 92

Care, maintenance and disposal
General The cleaning device generally needs no maintenance. However, to keep the clean-
ing device in good working condition for years to come, several points on care
and maintenance must be observed.
Before each
start-up - Only Robacta Reamer Twin: Check fill level in parting agent container and
top up if necessary
- Check the cleaning cutter / cleaning brushes for wear and replace if neces-
sary
- Empty the cleaning device spatter tray
- If fitted, empty the wire cutter tray
- Perform a general visual inspection on the device
Daily
CAUTION!
Danger from cleaning agents containing solvents.
This can result in damage to property.
▶
Only use solvent-free cleaning products on the cleaning device.
1
Remove parting agent deposits and dirt from device
Weekly
NOTE!
Only use solvent-free cleaning products on the parting agent container.
Only Robacta Reamer Twin:
- Check parting agent container for soiling and clean if necessary
- Blow through the suction filter in the parting agent container using com-
pressed air from the inside outwards through the suction hose (see "Starting
up the Robacta Reamer Twin parting agent nebuliser")
Every 6 months
1
Open the device and check the pneumatic valves for
- Leaks
- The secure seating of all screws
- The secure seating of all screw joints on the pneumatic valves
As necessary Open the device and
1
Clean inside of device using dry reduced compressed air
2
Lightly oil the lifting device cylinder guides
3
Restore the original condition of the device
Disposal Dispose of in accordance with the applicable national and local regulations.
72