Fronius Robacta Reamer Alu 3000upm, Operating Instructions Manual

Page: 15 / 92

General
Principle Robacta Reamer devices are welding torch cleaning devices that are used for
automatic cleaning of MIG/MAG welding torches. These devices can be relied
upon to clean the interior and front of gas nozzles on torches of many different
shapes, thereby significantly extending the service life of these wearing parts.
With the Robacta Reamer Twin, an even application of parting agent prevents re-
accumulation of dirt.
Device concept A lifting cylinder for the lifting device, as well as all pneumatic components, form
part of the robust steel housing.
On the outside are the cleaning motor and the clamping device for the gas nozzle
on the welding torch.
The Robacta Reamer Twin is fitted with a wire cutter and parting agent nebuliser
as standard.
During the cleaning process, both wire electrodes are shortened to a defined
length for the next welding process.
The wire cutter is an optional extra with the Robacta Reamer Alu Edition and
Robacta Reamer Alu 3000upm.
For professional installation, a stable fitting base is available for all devices.
Application
areas Devices from the Robacta Reamer series are intended exclusively for use in robot
and other automated applications.
The devices were designed for use in the automobile and component supply in-
dustry, equipment construction, chemical plant construction and machine and
rail vehicle manufacturing.
The Robacta Reamer Twin can be used for processing steel and aluminium mater-
ials.
The Robacta Reamer Alu Edition and the Robacta Reamer Alu 3000upm are in-
tended exclusively for aluminium applications.
15
EN